User Tools

Site Tools


drawingboard:fundamentals:fundamentals

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
drawingboard:fundamentals:fundamentals [2024/05/27 23:25] tailkinkerdrawingboard:fundamentals:fundamentals [2024/05/31 04:33] (current) tailkinker
Line 1: Line 1:
 ====== Fundamentals ====== ====== Fundamentals ======
  
-The first step in designing a vehicle with this system is to determine its Volume, Linear and Area factors.  As a rule of thumb, you may assume that every tonne of vehicle equals about a cubic meter of Volume.  Civilian vehicles tend to be a bit bulkier than military vehicles;  you can multiply your tonnage by 1.5 or 2 to compensate for that. +Before you can design your vehicle, you're going to have to ask yourself a few questions
- +  * [[drawingboard:fundamentals:tech_rating|What level of technology is the vehicle being designed at?]] 
-Find your Volume on the table belowand read across to find your Area and Linear values.  If the Volume you wish to work with does not appear on the table, find the smallest Volume that is larger than the Volume you wish, and use its values. +  * [[drawingboard:fundamentals:scale|How big is the vehicle?]] 
- +  * [[drawingboard:fundamentals:environment|Where does the vehicle primarily operate, and can it operate in other environments?]] 
-If your Volume is greater than 1,000, you can determine the Area and Linear values as follows+  * [[drawingboard:fundamentals:hull_shape|What shape is the vehicle?]]
-  * Divide the volume you want by 1,000.  If your volume is still over 1,000, divide it by 1,000 again.  Keep track of how many times you have to do this until your volume is 1,000 or under. +
-  * Find your new volume on the table.  As usual, if you don't find the exact volume you need, pick the smallest volume that is larger than your selected volume. +
-  * For every time you had to divide your Volumemultiply the listed Area by 100 and the listed Linear by 10. +
- +
- Volume  ^   Area    Linear +
-      1  |        |       +
-|    1.33  |    1.21  |     1.1 +
-|    1.73  |    1.44  |     1.2 +
-|     2.2  |    1.69  |     1.3 +
-|    2.74  |    1.96  |     1.4 +
-|    3.38  |    2.25  |     1.5 +
-|     4.1  |    2.56  |     1.6 +
-|    4.91  |    2.89  |     1.7 +
-|    5.83  |    3.24  |     1.8 +
-|    6.86  |    3.61  |     1.9 +
-|        |        |       +
-|    9.26  |    4.41  |     2.1 +
-|   10.65  |    4.84  |     2.2 +
-|   12.17  |    5.29  |     2.3 +
-|   13.82  |    5.76  |     2.4 +
-|   15.63  |    6.25  |     2.5 +
-|   17.58  |    6.76  |     2.6 +
-|   19.68  |    7.29  |     2.7 +
-|   21.95  |    7.84  |     2.8 +
-|   24.39  |    8.41  |     2.9 +
-|      27  |        |       +
-|   29.79  |    9.61  |     3.1 +
-|   32.77  |   10.24  |     3.2 +
-|   35.94  |   10.89  |     3.3 +
-|    39.3  |   11.56  |     3.4 +
-|   42.88  |   12.25  |     3.5 +
-|   46.66  |   12.96  |     3.6 +
-|      50  |   13.57  |    3.68  | +
-|   50.65  |   13.69  |     3.7 +
-|   54.87  |   14.44  |     3.8 +
-|   59.32  |   15.21  |     3.9 +
-|      64  |      16  |       +
-|   68.92  |   16.81  |     4.1 +
-|   74.09  |   17.64  |     4.2 +
-|   79.51  |   18.49  |     4.3 +
-|   85.18  |   19.36  |     4.4 +
-|   91.13  |   20.25  |     4.5 +
-|   97.34  |   21.16  |     4.6 +
-|     100  |   21.54  |    4.64  | +
-|  103.82  |   22.09  |     4.7 +
-|  110.59  |   23.04  |     4.8 +
-|  117.65  |   24.01  |     4.9 +
-|     125  |      25  |       +
-|  132.65  |   26.01  |     5.1 +
-|  140.61  |   27.04  |     5.2 +
-|  148.88  |   28.09  |     5.3 +
-|     150  |   28.23  |    5.31  | +
-|  157.46  |   29.16  |     5.4 +
-|  166.37  |   30.25  |     5.5 +
-|  175.62  |   31.36  |     5.6 +
-|  185.19  |   32.49  |     5.7 +
-|  195.11  |   33.64  |     5.8 +
-|     200  |    34.2  |    5.85  | +
-|  205.38  |   34.81  |     5.9 +
-|     216  |      36  |       +
-|  226.98  |   37.21  |     6.1 +
-|  238.33  |   38.44  |     6.2 +
-|     250  |   39.69  |     6.3 +
-|  262.14  |   40.96  |     6.4 +
-|  274.62  |   42.25  |     6.5 +
-|   287.5  |   43.56  |     6.6 +
-|     300  |   44.81  |    6.69  | +
-|  300.76  |   44.89  |     6.7 +
-|  314.43  |   46.24  |     6.8 +
-|  328.51  |   47.61  |     6.9 +
-|     343  |      49  |       +
-|     350  |   49.66  |    7.05  | +
-|  357.91  |   50.41  |     7.1 +
-|  373.25  |   51.84  |     7.2 +
-|  389.02  |   53.29  |     7.3 +
-|     400  |   54.29  |    7.37  | +
-|  405.22  |   54.76  |     7.4 +
-|  421.87  |   56.25  |     7.5 +
-|  438.98  |   57.76  |     7.6 +
-|     450  |   58.72  |    7.66  | +
-|  456.53  |   59.29  |     7.7 +
-|  474.55  |   60.84  |     7.8 +
-|  493.04  |   62.41  |     7.9 +
-|     500  |      63  |    7.94  | +
-|     512  |      64  |       +
-|  531.44  |   65.61  |     8.1 +
-|     550  |   67.13  |    8.19  | +
-|  551.37  |   67.24  |     8.2 +
-|  571.79  |   68.89  |     8.3 +
-|   592.7  |   70.56  |     8.4 +
-|     600  |   71.14  |    8.43  | +
-|  614.12  |   72.25  |     8.5 +
-|  636.06  |   73.96  |     8.6 +
-|     650  |   75.04  |    8.66  | +
-|   658.5  |   75.69  |     8.7 +
-|  681.47  |   77.44  |     8.8 +
-|     700  |   78.84  |    8.88  | +
-|  704.97  |   79.21  |     8.9 +
-|     729  |      81  |       +
-|     750  |   82.55  |    9.09  | +
-|  753.57  |   82.81  |     9.1 +
-|  778.69  |   84.64  |     9.2 +
-|     800  |   86.18  |    9.28  | +
-|  804.36  |   86.49  |     9.3 +
-|  830.58  |   88.36  |     9.4 +
-|     850  |   89.73  |    9.47  | +
-|  857.37  |   90.25  |     9.5 +
-|  884.74  |   92.16  |     9.6 +
-|     900  |   93.22  |    9.65  | +
-|  912.67  |   94.09  |     9.7 +
-|  941.19  |   96.04  |     9.8 +
-|     950  |   96.64  |    9.83  | +
-|   970.3  |   98.01  |     9.9 +
-|   1,000  |     100  |      10  | +
drawingboard/fundamentals/fundamentals.1716852301.txt.gz · Last modified: by tailkinker