Differences

This shows you the differences between two versions of the page.

--- drawingboard:externals:externals [2024/05/31 14:49] – tailkinker
+++ drawingboard:externals:externals [2024/05/31 16:09] (current) – tailkinker
@@ Line 3: / Line 3: @@
 At this stage, you should have the general shape of your vehicle.  You should have a modified Volume, Area and Linear values.  Now it's time to put the hull together.
-<WRAP !Note>
+There are two primary external features you will have to worry about:  [[drawingboard:externals:endostructure|Endostructure]] and [[drawingboard:externals:armour|Armour]].
-From this point forward, everything added to your vehicle will accumulate both weight and volume.  Your weight was chosen right at the beginning;  your goal should be to use up every gram of that weight.  You don't need to worry about filling all your volume, but if you want to be super-efficient, and you have lots of volume left over, you can go back and fiddle with it.
+<WRAP info>
+From this point forward, everything added to your vehicle will accumulate both mass and volume.  Your mass was chosen right at the beginning;  your goal should be to use up every gram of that mass.  You don't need to worry about filling all your volume, but if you want to be super-efficient, and you have lots of volume left over, you can go back and fiddle with it.
 </WRAP>
+===== Mass, Volume and Cost =====
+Mass is generally given in kilograms or in tonnes, and will be indicated as such.  For those from the United States, there are 1,000 kilograms in a tonne.  Remember to convert as needed.
+Volume will either be given in liters or in cubic meters.  There are 1,000 liters in a cubic meter, so again, remember to convert.
+Cost is given in imaginary currency values, represented by the symbol **₠**.  One ₠ is about enough to buy a loaf of bread.